Trolley vs. Floor Jack: Which One to Use?

Whats the difference between trolley and floor Jack

When needing to lift a car, there are two main types of jacks that can be used: the trolley jack and the floor jack.

The main difference between a trolley jack and a floor jack is portability. Trolley jacks have wheels, which makes them easy to move around, while floor jacks do not.

This means that trolley jacks are more portable, but floor jacks are more stable.

Both have their own advantages and disadvantages, which is why it’s important to know which one is best for the job at hand.

Here, we’ll take a look at the differences between these two jacks so you can make an informed decision when purchasing or using one.

We’ll also give you some tips on when to use each type of jack. So, let’s get started!

Trolley vs. Floor Jack

Trolley JackFloor Jack
Portability: Trolley jacks can be easily moved from one place to another, making them ideal for use in garages or workshops.Portability: Floor jacks are less portable than trolley jacks and can only be used on firm, level surfaces.
Can be used on uneven surfaces: The wheels of a trolley jack allow it to roll over small bumps or irregularities in the ground, which means it can be used on gravel or dirt roads.Can lift heavier vehicles: Floor jacks can support more weight than trolley jacks without tipping over.
Stability: Trolley jacks are less stable than floor jacks and are more likely to tip over.
Stability: Floor jacks are more stable than trolley jacks, which means they are less likely to tip over.
Cost: Trolley jacks can be more expensive than floor jacks.

What is a Trolley Jack?

A trolley jack is a lifting device that uses a hydraulic system to raise and lower vehicles. It gets its name from the fact that it has wheels, which allows it to be easily moved around.

The main advantage of a trolley jack is its portability. Because it has wheels, it can be easily moved from one place to another, making it ideal for use in garages or workshops.

Another advantage of a trolley jack is that it can be used on uneven surfaces. The wheels allow the jack to roll over small bumps or irregularities in the ground, which means it can be used on gravel or dirt roads.

A trolley jack should be used when portability and ease of use are important. If you need to lift a car in order to work on it, then a trolley jack is ideal.

It’s also a good choice for lifting cars that are parked on uneven surfaces, as the wheels will allow the jack to roll over any bumps.

What is a Floor Jack – When to use them?

A floor jack is a lifting device that uses a hydraulic system to raise and lower vehicles. It is similar to a trolley jack, but it does not have wheels.

The main advantage of a floor jack is its stability. Because it does not have wheels, it can be placed on a firm, level surface without the worry of it rolling over. This makes it ideal for use on concrete floors.

Another advantage of a floor jack is that it can be used to lift heavier vehicles. Because it does not have wheels, it can support more weight without tipping over.

A floor jack should be used when stability is important. If you need to lift a heavy car or truck, then a floor jack is the best choice.

It’s also a good choice for lifting cars that are parked on smooth, level surfaces, as the lack of wheels means there’s no risk of the jack rolling over.

Important Tips When Using Floor and Trolley Jacks

Using a trolley jack is relatively simple, but there are a few things you need to keep in mind to use it safely.

Before using the jack, make sure that the vehicle is parked on level ground and that the wheels are choked so that it can’t roll.

Once the vehicle is secure, position the jack under one of the lifting points. These are usually located near the suspension or underneath the car.

Once the jack is in place, pump the handle to raise the vehicle.

Never get under a vehicle that is supported by a jack, as it could collapse and cause serious injury.

When you’ve finished working on the vehicle, lower it back down to the ground and remove the jack.

So, there you have it!

No matter what kind of car or truck you have, at some point, you’re going to need to use a jack like a floor jack or trolley jack.

Now that you know the pros and cons of each type of jack, you can make an informed decision about which one to use for your next project.

And remember, always use jack stands when working under a lifted vehicle!

And when choosing a jack, check the capacity and make sure it is compatible with your specific vehicle.

Other Related Posts:
Clay Bar vs. Cleaner Wax: What’s Better for My Car?  
Clay Bar vs. Cleaner Wax

Does the paint of your car feel rough even when freshly washed? What happens is, many car owners think that Read more

What Solution to Use in Ultrasonic Carburetor Cleaner?
Best Ultrasonic Carb Cleaner Solution

Although ultrasonic cleaning can be done by using just plain tap water, using an appropriate ultrasonic solution/solvent is recommended if Read more

Compression-Ignition VS Spark-Ignition Engine- What’s the Difference?
Spark-engine

When it comes to gasoline-powered engines, there are two main types: compression-ignition and spark-ignition. Both have their pros and cons, Read more

Projector Vs Reflector Headlights: What’s Better for My Car?
Projector-headlights

If you're like most drivers, then you've probably wondered which type of headlights are better for your car: projector or Read more

error: Content is protected !!