How to Fix an Oil Extractor Pump That’s Not Working?

Fixing Oil Extractor Pump

If you’re a car owner, there’s a good chance you’ll eventually need to use an oil extractor pump.

An oil extractor pump is a device that’s used to remove oil from a car’s engine. It’s typically used when changing the oil, and it can also be used to clean up oil spills.

But what do you do if your oil extractor pump isn’t working?

In this blog post, we’ll show you how to fix an oil extractor pump that’s not working.

Read on to learn more!

What Causes the Oil Extractor Pump to Malfunction?

If your oil extractor pump isn’t working, it could be because the pump is clogged or damaged. Additionally, the problem could be due to a power issue or a problem with the oil itself.

A few other reasons why your oil extractor pump isn’t working are:

1- The Jammed Pipes

The pump may also not work if the pipes that connect it to the engine are jammed. This often happens when using an oil extractor pump for the first time.

If this is the case, you’ll need to use a plunger to unclog the pipe.

2- A Faulty Pump

If the pump itself is faulty, then you’ll need to replace it. This is usually not a do-it-yourself project and you’ll need to take your car to a mechanic.

3- Leak in Tube or Pipe

There may be a small leak in the tube or pipe that’s connected to the oil extractor pump. This can happen if the connections are not tight enough.

To fix this, you’ll need to use a wrench to tighten the connection.

4- Faulty Vacuum Pressure Release Valve

The vacuum pressure release valve is a safety feature that prevents the pump from overloading.

However, if this valve is faulty, it can cause the pump to stop working.

To fix this, you’ll generally need to replace the valve.

5- The Pump Is Not Assembled Properly

Another common issue is that the pump isn’t assembled properly. This usually happens when the pump is new and you’re using it for the first time.

To fix this, you’ll need to follow the instructions in the manual and make sure that all of the parts are properly connected.

How to Fix an Oil Extractor Pump that’s Not Working?

If your oil extractor pump isn’t working, you’ll need to diagnose the problem and then take the appropriate steps to fix it.

Here’s what you need to do:

1. Check the oil level

The first thing you should do is check the oil level. If the oil is low, it could be the reason why the pump isn’t working.

To check the oil level, you’ll need to remove the dipstick from the engine and wipe it clean. Then, reinsert the dipstick and pull it out again.

Check the oil level on the dipstick and add more oil if necessary.

2. Check the power source

If the pump isn’t working, it could be because there’s no power going to it.

First, check to make sure that the power cord is plugged in. Then, check the circuit breaker to see if it’s tripped.

If the circuit breaker is tripped, you’ll need to reset it. If the problem persists, you may need to call an electrician.

3. Check for clogs

As we mentioned earlier, one of the most common reasons why oil extractor pumps stop working is because they become clogged.

To check for clogs, remove the pump from the engine and inspect it for any blockages. If you find a clog, you’ll need to use a plunger or a snake to remove it.

4. Inspect the oil extractor pump for damage

If the pump is damaged, it will need to be replaced. Inspect the pump for any cracks, leaks, or other damage.

If you find any damage, take your car to a mechanic and have them replace the pump.

5. Check the vacuum pressure release valve

As we mentioned earlier, the vacuum pressure release valve is a safety feature that prevents the pump from overloading.

However, if this valve is faulty, it can cause the pump to stop working.

To check the vacuum pressure release valve, remove it from the pump and inspect it for any damage. If you find any damage, you’ll need to replace the valve.

6. Make sure the pump is properly assembled

If the oil extractor pump isn’t working, it could be because it’s not properly assembled. This is often the case when you’re using the pump for the first time.

To make sure the pump is properly assembled, follow the instructions in the manual and make sure that all of the parts are connected correctly.

7. Call a mechanic

If you’ve tried all of the above and the oil extractor pump still isn’t working, it’s time to call a mechanic.

They can diagnose the problem and replace any parts that are damaged or broken.

How Much for Fixing Faulty Oil Extractor Pump?

If the pump is just clogged, you may be able to fix it yourself by using a plunger or snake.

However, if the pump is damaged, you’ll need to call a mechanic and have it replaced.

The cost of replacing an oil extractor pump will vary depending on the make and model of your car.

When it comes to labor costs, you can expect to pay between $50 and $100 for an hour of a mechanic’s time.

So, if it takes the mechanic two hours to replace the pump, you’ll be looking at a bill of $100 to $200.

If you can’t fix it and consider buying one, you can expect to pay between $200 and $400 for a new pump.

However, if you have a luxury car, the cost could be closer to $1,000.

To sum it up, the cost of fixing an oil extractor pump that’s not working will depend on the problem. If the pump is just clogged, you may be able to fix it yourself.

However, if the pump is damaged, you’ll need to call a mechanic and have it replaced. The cost of replacing an oil extractor pump will vary depending on the make and model of your car.

I hope this article was helpful in understanding how you can fix an oil extractor pump that’s not working and the costs related to it.

Other Related Posts:
Turbocharged Engine – Different Types with Pros & Cons
Turbocharged-Engine

A turbocharged engine is a type of engine that uses a turbine to increase the pressure and flow of air Read more

Inline 4-Cylinder VS. 6-Cylinder – What’s Better?
4-CYLINDER-ENGINE

If you're like most people, when you go car shopping, the first thing you look at is the engine. You Read more

Different Types of Brakes, Brake-Pads, and Braking Systems
brakes

There are many different types of car brakes, from the traditional brake pads to the more modern braking system. Each Read more

Front-Wheel Drive vs. Rear-Wheel Drive – Differences with Pros & Cons
Front-Wheel-Drive

When it comes to car engines, there are a few different types that you will likely come across. The two Read more

error: Content is protected !!